FYH PP204 Bearings

T max.:100 °C; H:55.6 mm; Designation of housing:PLE210N-; N1:27 mm; s1:21.75 mm; A1:36 mm; Z:77.1 mm; G:M6x1; C0:23.2 kN; Designation of open end cover:SCOU210-31;

Min operating temperature, Tmin:-60 °C; fillet radius:1.1 mm; finish/coating:Uncoated; a min:3.07 mm; Da max:55.5 mm; Brand:NTN; outer ring width:17 mm; snap ring included:Without Snap Ring; Characteristic rolling element frequency, BSF:3.66 Hz; Category:Single Row Ball Bear;

ra max:2 mm; Nref:3,400 rpm; Brand:SNR; Characteristic rolling element frequency, BSF:6.3 Hz; Min operating temperature, Tmin:-20 °C; Max operating temperature, Tmax:120 °C; Nlim:4,300 rpm; D:190 mm; Da max:179 mm; D1:165.1 mm;

L:165 mm; N:17mm; A1:28 mm; d:30 mm; L1:56 mm; H1:18 mm; C0:11.2 kN; A:50 mm; S:8 mm; H2:130 mm;

B1:92.1 mm; A2:75.9 mm; A1:25 mm; s1:64.35 mm; L:226 mm; C:104.26 kN; e:18 mm; Recommended tightening torque for set screw:27.1 Nm; Designation of bearing:EX314-43G2T04; Designation of housing:FS314-;

A5:22.2 mm; Weight:1.26 kg; H1:89 mm; B:38.1 mm; C0:11.2 kN; G:M6x1; Designation of open end cover:SCO206-30; L3:57 mm; Designation of housing:T206N-; T max.:100 °C;

Dz:120 mm; s1:26.85 mm; C0:32.8 kN; Designation of closed end cover:SCC212; G:R1/8"; H:69.9 mm; L1:32 mm; S:14.9 mm; Designation of bearing:US212-39G2T20; L:150 mm;

B:41.2 mm; C:31.85 kN; Recommended tightening torque for set screw:11.5 Nm; H1:13 mm; Z:70.2 mm; E:25 mm; Designation of closed end cover:SCC209; J:90 mm; T max.:200 °C; H2:108 mm;

B1:43 mm; A1:30 mm; B:27 mm; L1:56 mm; N:17mm; H:95 mm; Adapter sleeve reference:H2307; Designation of bearing:UK207G2H; J:127 mm; C:25.7 kN;

C:31.85 kN; d1:62 mm; H2:107 mm; A1:32 mm; Designation of housing:PAE209N-; A:48 mm; T max.:100 °C; S:21.4 mm; J:95.3 mm; Designation of open end cover:SCOE209-45;

Weight / LBS:0.234; UNSPSC:31171504; Fatigue limit load, Cu:0.3 kN; D:47 mm; Enclosure:Open; f0:13.2; Minimum Buy Quantity:N/A; Cage Material:Steel; rs min:1 mm; Nlim (oil):18,000 rpm;

Characteristic cage frequency, FTF:0.43 Hz; ra max:1 mm; Characteristic inner ring frequency, BPFI:7.42 Hz; Max operating temperature, Tmax:120 °C; rs min:1.1 mm; B:18 mm; Characteristic outer ring frequency, BPF0:5.58 Hz; Dynamic load, C:28.3 kN; Min operating temperature, Tmin:-20 °C; da min:61.5

L:190 mm; J:146 mm; Weight:2.48 kg; H1:20 mm; N:17mm; d:41.28 mm; Designation of housing:P209-; B:49.2 mm; L1:60 mm; N1:23 mm;

Seal Type:Single Lip; Flinger Material:None; Grease Type:Unirex N2; Base to Center Height:Not Applicable; Flinger Type:None; Self Aligning:Self Centering; Bearing Insert Material:Steel; Bearing Outer Ring Material:Steel; Expansion Type:Non-Expansion; Manufacturing Plant Location:Rogersville, TN;

Recommended tightening torque for set screw:8.3 Nm; T min.:-20 °C; L:99 mm; L2:89 mm; J:50.8 mm; J4:31.8 mm; d:38.1 mm; Designation of housing:FBL208-; C0:14.3 kN; A:36 mm;