DODGE F4R-IP-215RE Flange Block Bearings

B:33 mm; G:M 170x3; d3:220 mm; Mass adapter sleeve assembly:5.9 kg; d:170 mm; B1:101 mm; Lock nut:KMFE 34; d1:150 mm; Hydraulic nut:HMV 34 E;

da min.:48.2 mm; d2:52.6 mm; Db max.:66.6 mm; Mass bearing:0.12 kg; Preload class D GD:400 N; Static axial stiffness, preload class D:115 N/µm; B:12 mm; Calculation factor f0:10.5; Basic static load rating C0:9.5 kN; a:13.6 mm;

Oil Speed Rating n2:5800 rpm; Basic Static Radial Load Rating Co:610000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:3700 rpm; Basic Dynamic Radial Load Rating C:390000 N; Fillet Radius rb:1.00 mm; B:92.00 mm; D:290.0000 mm; d:190.000 mm;

Recommended diameter for attachment bolts, inch G:0.5 in; B:42.9 mm; A5:28.6 mm; d:31.75 mm; Fatigue load limit Pu:0.655 kN; End cover:ECL 207; s1:25.4 mm; J1:31.8 mm; L:95 mm; A1:16.1 mm;

P60°:394 kN; Taconite seal (dc shaft position):TER 134; RG:3/4 NPT; N1:28.575 mm; Da:269.999 mm; R1:95.25 mm; Ca:82.804 mm; P90°:236 kN; db:168.275 mm; R2:39.688 mm;

Grease Speed Rating n1:3800 rpm; d:60.000 mm; B:42.00 mm; Oil Speed Rating n2:4500 rpm; D:150.0000 mm; Basic Dynamic Radial Load Rating C:125000 N; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:41500 N;

d2:92 mm; d:65 mm; B:1.5 mm; Mass lock washer:0.03 kg; M:62.5 mm; d1:79 mm; f:8 mm;

Calculation factor e:1.14; Calculation factor A:0.0418; Calculation factor Y2:0.57; D2 ≈:91.55 mm; rb max.:1 mm; a:47 mm; Da max.:99 mm; ra max.:2 mm; Calculation factor Y1:0.55; Mass bearing:1.2 kg;

Grease Speed Rating Open/Shielded n1:2400 rpm; Oil Speed Rating Open/Shielded n2:2900 rpm; d:105.000 mm; Fillet Radius ra:3.00 mm; Accessories:One Seal; Basic Static Radial Load Rating Co:228000 N; D:290.0000 mm; Sealed Speed Rating n3:1600 rpm; B:65.00 mm; Basic Dynamic Radial Load Rating C:247000

d:482.6 mm; Calculation factor Y0:2; d1 ≈:505 mm; Mass bearing:240 kg; Basic static load rating C0:13700 kN; T:330.2 mm; Comparative radial load rating CF:1290 kN; D:615.95 mm; Design variant/feature:TQOESN/GW; B:419.1 mm;

dn:74.5 mm; Basic static load rating C0:12.5 kN; C2:2.5 mm; Da max.:85.4 mm; Reference grease quantity Gref:2.6 cm³; Static axial stiffness, preload class C:116 N/µm; ra max.:1 mm; Preload class C GC:532 N; D1:82.32 mm; b:2.2 mm;

Cap bolt recommended tightening torque:298.3 N·m; Pa:20.7 kN; P60°:249 kN; R1:79.375 mm; P180°:107 kN; Cap bolt, SAE grade:8; da:107.95 mm; Stabilizing ring:SR-24-20; Max. speed for PosiTrac Plus seal:1350 r/min; P120°:94.3 kN;

Oil Mist Speed Rating Max. n3:24000 rpm; D:50.8000 mm; d:20.640 mm; X-L-O Part Number:55-57; Fillet Radius ra:1.00 mm; Keyway f:1.6 mm; Grease Speed Rating Max. n1:20000 rpm; Keyway e:21.4 mm; B:25.40 mm; Oil Speed Rating Max. n2:22000 rpm;

B:70.00 mm; Basic Dynamic Radial Load Rating C:319000 N; Oil Speed Rating n2:2600 rpm; Basic Static Radial Load Rating Co:425000 N; d:110.000 mm; Fillet Radius ra:3.00 mm; Grease Speed Rating n1:2100 rpm; Fillet Radius rb:1.00 mm; D:320.0000 mm;

Design (sliding contact surface combination):Steel/steel; Material constant KM:330; ra max.:1 mm; Basic dynamic load rating C:600 kN; Specific dynamic load factor K:150 N/mm²; r1 min.:1 mm; M:4 mm; Lubricant:Maintenance free &nd; Sealing solution:Triple-lip seals; da min.:87.1 mm;